The Cabinet Washer (CW) range consists of 5 models of utensil washers capable of satisfying all washing requirements for the bakery, butchery, ice cream, catering and food industry sectors.
Solid, user-friendly, reliable machines that, thanks to a new electronic system, can optimise and simplify work for operators in the sector.
Perfect Hygiene
- The interior of the machine is completely rounded without right angles
- Ample filtering surfaces in steel are easy to remove
- Suction pump filter to protect the wash pump and prevent leftovers from depositing in the wash circuit
- Membrane switch keyboard and display with completely flat surface, guaranteeing maximum hygiene.
User Friendly
- Split door perfectly counterbalanced, easy to open
- Height of rack loading with door open 900 mm
- Structure with double panelling in 3-mm thick satin finished stainless steel AISI 304
- Revolving wash and rinse arms in stainless steel AISI 304
- Easy-extraction wash racks
- Excellent accessibility to the machine interior to remove wash/rinse arms, tank and suction pump filters
- Thermal and acoustic insulation on request
Safety
- Digital display advises of correct functioning of cycle, temperatures and tank filling
- Low-voltage electronic control (12 V) to minimise danger during maintenance and repair work
- Keyboard and display panel splash-proof with IP67 protection
- Cycle-stoppage microswitch in case of accidental door opening
Cutting Edge Electronics
- Electronic control to program wash-cycle phases, temperatures and times
- Digital display shows wash phases and temperatures
- Self-diagnosis system for machine functioning
- Machine operation can be selected via the start button or by closing the door in cases of intensive usage
- Internal self-cleaning function
- Compliance with HACCP regulations assured by means of the IWM Dishwash Monitoring System (HDMS), which can be installed in the following three versions:
- HDMS 1
direct data transmission from machine to PC - HDMS 2 –
LogBox data recording and direct data transmission from machine to PC - HDMS 3
LogBox data recording and data transmission from machine through GSM-SMS to cellphone or PC-Modem for TELEDIAGNOSE; the HDMS is an optional
- HDMS 1
Accessories
- Break Tank System standard on all machines
- “Break Tank” system assures steady temperature and pressure during the rinse phase, preventing any contamination of the water in the mains due to backflows from the machine
- Rinse-aid dispenser standard on all models
- Set of racks included with every machine
- Accessories on request: external shower, detergent pump, wheels, drain pump
TECHNICAL SPECIFICATIONS
| Machine Height (with door open) | mm1500x915x1890H/2150H |
| Cycle Length | 2-4-6 max 10min |
| Wash Space | mm1320x700x650H |
| Construction | Double panel |
| Machine Interior | Self-cleaning |
| Rinse-aid dispenser | Standard |
| Wash pump | 2 x 2350W |
| Rinse pump | 550W |
| Detergent dispenser | On request |
| Break tank system | Standard |
| Electrical connection | 400V 3N ~ 50Hz |
| Total power | 16700W |
| Boiler heating element | 2 x 6000W |
| Tank heating element | 6000W |
| Tank capacity | 132 l. |
| Boiler capacity | 26 l. |
| Water supply | 2 ÷ 4 bar Ø 3/4 "G |
| Water consumption per cycle | 8 l. |
| Drain hose connection | Ø 1 1/2 "G |
| Acoustic pressure level | < 70 db (A) |
Disclaimer
The manufacturer reserves the right to alter the technical details without warning
We recommend mains water supply at 55°C
The hardness of the water supplied must be between 4 ° and 10 ° F (French hardness degrees) In case of greater levels of hardness, a water softener must be used
