CW 13 EX BT

The Cabinet Washer (CW) range consists of 5 models of utensil washers capable of satisfying all washing requirements for the bakery, butchery, ice cream, catering and food industry sectors.

Solid, user-friendly, reliable machines that, thanks to a new electronic system, can optimise and simplify work for operators in the sector.

The interior of the machine is completely rounded without right angles
Ample filtering surfaces in steel are easy to remove
Suction pump filter to protect the wash pump and prevent leftovers from depositing in the wash circuit
Membrane switch keyboard and display with completely flat surface, guaranteeing maximum hygiene.

Split door perfectly counterbalanced, easy to open
Height of rack loading with door open 900 mm
Structure with double panelling in 3-mm thick satin finished stainless steel AISI 304
Revolving wash and rinse arms in stainless steel AISI 304
Easy-extraction wash racks
Excellent accessibility to the machine interior to remove wash/rinse arms, tank and suction pump filters
Thermal and acoustic insulation on request

Digital display advises of correct functioning of cycle, temperatures and tank filling
Low-voltage electronic control (12 V) to minimise danger during maintenance and repair work
Keyboard and display panel splash-proof with IP67 protection
Cycle-stoppage microswitch in case of accidental door opening

Electronic control to program wash-cycle phases, temperatures and times
Digital display shows wash phases and temperatures
Self-diagnosis system for machine functioning
Machine operation can be selected via the start button or by closing the door in cases of intensive usage
Internal self-cleaning function
Compliance with HACCP regulations assured by means of the IWM Dishwash Monitoring System (HDMS), which can be installed in the following three versions:
- HDMS 1
  direct data transmission from machine to PC
- HDMS 2 –
  LogBox data recording and direct data transmission from machine to PC
- HDMS 3
  LogBox data recording and data transmission from machine through GSM-SMS to cellphone or PC-Modem for TELEDIAGNOSE; the HDMS is an optional

Break Tank System standard on all machines
“Break Tank” system assures steady temperature and pressure during the rinse phase, preventing any contamination of the water in the mains due to backflows from the machine
Rinse-aid dispenser standard on all models
Set of racks included with every machine
Accessories on request: external shower, detergent pump, wheels, drain pump

Video

Technical Specifications

Machine Height (with door open)	mm1500x915x2040H/2305H
Cycle Length	2-4-6 max 10min
Wash Space	mm1320x700x820H
Construction	Double panel
Machine Interior	Self-cleaning
Rinse-aid dispenser	Standard
Wash pump	2 x 2350W
Rinse pump	550W
Detergent dispenser	On request
Break tank system	Standard
Electrical connection	400V 3N ~ 50Hz
Total power	16700W
Boiler heating element	2 x 6000W
Tank heating element	6000W
Tank capacity	132 l.
Boiler capacity	26 l.
Water supply	2 ÷ 4 bar Ø 3/4 "G
Water consumption per cycle	8 l.
Drain hose connection	Ø 1 1/2 "G
Acoustic pressure level	< 70 db (A)

Disclaimer
The manufacturer reserves the right to alter the technical details without warning
We recommend mains water supply at 55°C
The hardness of the water supplied must be between 4 ° and 10 ° F (French hardness degrees) In case of greater levels of hardness, a water softener must be used